Changing The Master Code; Configuring The Relay Activation Time - SOMFY VSYSTEMPRO Manuel D'installation Et D'utilisation

EN

3.1 Changing the master code

The master code is a number consisting of 4 to 8 figures.
See diagram P1 at the end of the document.
Key:
Abbreviation
CM1
CM2
3.2 Configuring the relay activation time
Each relay must be configured to be activated between 1 and 99 seconds or in bistable
mode. The relay activation time parameter must consist of 2 figures.
- Relay set at 00: bistable relay
- Relay set at 01: 1 second
- Relay set at 02: 2 seconds
- ...
- Relay set at 99: 99 seconds
See diagram P2 at the end of the document.
Key:
Abbreviation Meaning
CM1 Existing master code
TR1 Relay 1 activation time
TR2 Relay 2 activation time
TR3 Relay 3 activation time
Beeping The keypad emits a beeping sound instead of a little tune to indicate
sound (*)
an input error (a single digit for example): in this instance, the correct
parameter needs to be entered again in order to be able to continue
the procedure.
Note: when a relay is set to bistable mode, in "use" mode, the relay operates in the
following way:
- "user code" followed by pressing "Enter" activates the relay.
- "user code" followed by pressing "Clear" deactivates the relay.
7
Meaning
Existing master code
Default master code: 11111111
New master code
Copyright © 2016 Somfy SAS. All rights reserved.