Videotec ULISSE RADICAL Manuel D'instructions page 27

NTP Server: It is also possible to specify if the device
needs to be synchronised with an external NTP
(Network Time Protocol) server.
• DISABLED: Select this option if you do not wish to
synchronise date and time of the device.
• DHCP: Select this option if you wish to synchronise
the date and time of the device with those of an
NTP server (Network Time Protocol) indicated by
the DHCP server.
• STATIC: Select this option if you want to
synchronise the date and time of the device with
those of the NTP server specified by the static
address.
In order for the device to operate correctly,
it is necessary to synchronise it with the
VMS software using a NTP server.
9.1.6 User Configuration page
From menu entry User Configuration it is possible
to manage all users that have access to the device.
Administrator type users can access the complete
configuration of the device. Users such as Operators,
Users and Anonymous have limited access to the
management pages.
Fig. 56
The device can be configured only by users
with administration privileges.
MNVCUPKHXL_2222_EN
9.1.7 Motion Parameters Page
From menu entry Movement Parameters it is possible
to control, via web, all Pan & Tilt parameters.
• Offset Pan: The pan & tilt has a mechanically
defined 0° position. The Offset Pan function allows
the definition of a different 0° position using
software.
• Maximum Speed: Sets the maximum manual
speed.
• Speed with Zoom: When enabled, this parameter
automatically slows down the Pan & Tilt speed,
based on the Zoom factor.
• Tilt Factor: Sets the reduction factor of the tilt axis
manual speed.
• Pan Limits: Enables the limits of Pan.
• Pan Start: Sets the start limit of Pan.
• Pan End: Sets the end limit of Pan.
• Tilt Start: Sets the start limit of Tilt.
• Tilt End: Sets the end limit of Tilt.
Fig. 57
25