Videotec ULISSE RADICAL Manuel D'instructions page 12

6.2 Unpacking
When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
When returning a faulty product we recommend
using the original packaging for shipping.
Keep the packaging in case you need to send the
product for repairs.
Unpack the sunshield of the device, taking
care not to damage the housing.
6.2.1 Removal of the protective
packaging
Remove the protective packaging before installing
the device.
10
6.2.1.1 Housing opening
Loosen the leak-proof screws placed on the sides and
lift the upper part of the housing.
Fig. 4
First of all tighten the two central screws as
shown in figure.
Fig. 5
After installation and wiring, close the
product.
6.2.1.2 Remove the protective packaging
Open the housing and remove the protective
packaging.
Fig. 6
MNVCUPKHXL_2222_EN