Videotec ULISSE RADICAL Manuel D'instructions page 13

6.3 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Positioning unit
• Power supply base
• Accessories package:
• Serial adaptor
• Serial extension cable
• Allen wrenches
• Spacers
• Label
• Cable ties
• Ferrite
• Silicone sheath
• Reduction gaskets for cable glands
• Instruction manual
• Attachment plate for desiccant bag
• Bolts and screws
• Counterweights package:
• Counterweights
• Counterweights brackets
• Sunshield
• Tool kit for washing system mounting (WASPT):
• Nozzle support with screws (nozzle and pipes
are included in the washing kit)
6.4 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
MNVCUPKHXL_2222_EN
6.5 Preparatory work before
installation
6.5.1 Mounting the bracket
For installations subject to vibrations, only
use the parapet bracket.
Different types of supports are available (10
Accessories, page 31). Choose a suitable bracket for
the installation and follow all the instructions in the
suggested chapter.
Take special care when attaching and
fastening down the apparatus. The
fastening system must be capable of
supporting at least 4 times the weight of
the entire equipment.
The device should be assembled vertically.
Any other position could impair the
performance of the appliance.
Do not attach the device upside down.
6.5.2 Cables management
The connection cables should not be
accessible from the outside.
The cables must be adequately fastened to
the structure to avoid the excessive weight
causes accidental removal.
You must use cables suited to the type of
installation.
Insert the cables into the support so that they
protrude by about 50cm.
50cm
Fig. 7
50cm
11