HumanTechnik Signolux Mode D'emploi page 15

Mounting the »signolux«-transmitter
Important note:
Kindly keep in mind that metal parts
and other building materials may in-
terfere with the transmission of the ra-
dio signal. As they can be either visi-
ble or hidden at the desired mounting
location you should always carry out
a functional test at the mounting loca-
tion before starting the mounting pro-
cess, and, if required, choose a diffe-
rent mounting or installation location if
the reception is not guaranteed.
The »signolux«-transmitter can be
mounted using the supplied wall
mount. To use it, fix the wall mount
onto a wall (or rafter, cupboard etc.)
When mounting onto a brick- or stone
wall, you may need a power drill and
stone bit to do so. Use the supplied
wall plugs in this case. Once fixed,
hang the »signolux« transmitter onto
the wall mount bracket.
Maintenance and care
The »Acoustic universal transmitter«
does not require any maintenance.
If the unit does become dirty, simply
wipe it clean with a soft, damp cloth.
Never use spirits, thinners or other or-
ganic solvents.
Do not set up the unit where it
will be exposed to full sunlight for
long periods. In addition it must be
protected against excessive heat,
moisture and severe mechanical
shock.
Note: This product is not protected
against splash water. Do not place
any containers filled with water, such
as flower vases, or anything with an
open flame, such as a lit candle, on
or near the product.
English 15