Figure 3
- The plastic cover can now be taken
off, the battery compartment has
become accessible.
- Insert the 3 AAA-batteries.
Ensure the correct polarity of the
batteries. (Figure 4)
Figure 4
- Attach the plastic cover:
Lay the cover onto the housing with
approx 1 cm distance to the lower
edge. (Figure 5)
English 12
Figure 5
- Push the cover downwards until
it clicks back onto the latching. The
front cover is now in place again.
Preset transmitter indication
Signolux devices can be used
together immediately and without
prior pairing when delivered.
By default, the »Acoustic universal
transmitter« will be indicated by re-
ceiver devices as follows:
- When pressing the function button
as „Doorbell 2"
- when using connection socket #1 it
will be shown with the „Doorbell 1"
icon
- Connection socket #2 is indicated
with the baby alarm icon
Important notice 1:
If the transmitter is to be displayed
with an event icon of your own choice,
this can be done as described in the
chapter Pairing and assigning to
event icons.