9 Maintenance and cleaning
9.3 Replacing the fuse
EN - 18
ABICOOLER 1300 115V CSA
Fill the new coolant only up to the MAX line.
6
6.2 Initial commissioning on page EN-12
Seal the filler neck with the screw cap.
7
Loosen the fuse holder on the back side of the
1
device using a suitable flathead screwdriver.
Remove the fuse holder and fuse.
2
Remove the fuse from the fuse holder.
3
Insert the T4A fuse (5 × 20 mm).
4
Mount the fuse holder with the new fuse in
5
the device.