Alarm Functions - Bresser 4Cast Mode D'emploi

˚C
˚C
ChAnnel AUto-sCAn DisPlAY
• Press the [ChAnnel] button, until the
nels. The measurements from each channel will be displayed alternatively in 5-second intervals.
note: the channel auto-scan feature can only be activated if there is more than one outdoor
sensor operating and each is set to a different channel.
mAXimUm AnD minimUm temPerAtUres
• The maximum and minimum recorded indoor and outdoor temperatures will be automatically stored
in the memory of the weather station. If you press the [mem] button, the respective indicators,
s
s
[mAX] or [min] will be displayed.
s
• To clear the memory, hold the [mem] button for 3 seconds. The maximum and minimum tempera-
ture records will be erased.

AlArm fUnCtions

Weekday Alarm
• This is a repeat alarm that will be activated daily from Monday to Friday at a set time.
single Alarm
• This is a single alarm that will be activated once at a set time.
Pre-Alarm
• The pre-alarm will be activated and the icon will flash if the temperature of Channel 1 is falling to
+0 °C or below.
• This alarm is programmable 15, 30, 45, 60 or 90 minutes earlier than the weekday alarm or single
alarm.
hoW to set the AlArm
• Press the [set] button to toggle between weekday alarm, single alarm or pre-alarm.
If the alarm is disarmed, the time will be displayed as "OFF W-ALM"
• Hold the [set] button for 3 seconds. The hour digits will start flashing.
• Enter the hour by using the [ ▲ ] or [ ▲ ] button.
• Press the [set] button to confirm, the minute digits will start flashing.
• Enter the minute by using the [ ▲ ] or [ ▲ ] button.
• Press the [set] button to exit and the respective alarm icons [
activated.
hoW to stoP the AlArm
• When the alarm is on, the respective alarm icons [
or [ ▼ ] button to stop the alarm immediately.
• To turn off the alarm, press the [ ▲ ] or [ ▼ ] button to change the alarm time display as "OFF W-ALM".
• If no button is pressed, the alarm will sound for 2 minutes and then deactivated automatically.
s
icon is displayed, to enable an automatic scan of all chan-
˚C
s
s
s
] and [
36
˚C
˚C
˚C
s
s
], [ ] and [
] will be flashing. Press the [ ▲ ]
˚C
] will be