Manual Time Setting; Alarm Setting - Bresser Thermo Hygro Quadro NLX Mode D'emploi

2.
For more information on manual time setting, refer to the
chapter "Manual time setting".

10 Manual time setting

1.
2.
3.
4.
5.
6.

11 Alarm setting

Alarm time setting
1.
2.
3.
4.
5.
6.
14 / 84
If no radio signal is still received, the time setting must
be made manually.
In normal display mode, press SET button for approx. 3
seconds to switch to time settings mode.
Digits to be set are flashing.
Press UP or DOWN button to change the value.
Press SET button to confirm and continue to the next
setting.
Settings order: time zone > hours > minutes > year >
month > day > 12/24-hours mode
Finally press the SET button to save the settings and
exit the setting mode.
In normal display mode, press SET button to switch to
alarm time display (AL).
Press and hold SET button for approx. 3 seconds to
enter alarm time setting mode.
Digits to be set are flashing.
Press UP or DOWN button to change the value.
Press SET button to confirm and continue to the next
setting.
Settings order: hours > minutes