Publicité
M-initial
You may select the initial measurement functions as FACTORY or USER. The initial
measurement functions and range can be set according to
Table 4-2
Available settings for M-initial
Function position
F1
F2
F3
F4
F5
F6
F7
F8
F8A
F9
Each rotary switch position is assigned a default measurement function and a
default measurement range.
As example, when you turn the rotary switch to the
measurement function is diode measurement according to the default factory
setting. In order to choose the frequency counter function you require, press the
Keysight U1253B User's and Service Guide
Function setting
AC V
DC V, AC V, AC+DC V
DC mV, AC mV, AC+DC mV
Ohm, nS
Diode, frequency counter
Temperature, capacitance
DC A, AC A, AC+DC A
DC mA, AC mA, AC+DC mA
DC A, AC A, AC+DC A
29 different frequencies
button.
Changing the Default Settings
Table 4-2
Range setting
Auto or manual ranges
Auto or manual ranges
Auto or manual ranges
Auto or manual ranges
No range setting
Auto or manual ranges
Auto or manual ranges
Auto or manual ranges
Auto or manual ranges
Duty cycle = (N/256) × 100%
Pulse width = (N/256) × (1/frequency)
position, the initial
4
below.
137
Publicité
