Publicité
4
Changing the Default Settings
Table 4-1
Default factory settings and available setting options for each feature (continued)
Menu
Feature
T-TYPE
T-UNIT
2
mA-SCALE
CONTINUITY
MIN-Hz
BEEP
APO
3
BACKLIT
MELODY
GREETING
112
Default factory
Available setting options
setting
K
Thermocouple type.
– Available options: K-type or J-type
°C
Temperature unit.
– Available options:
– °C/°F: Dual display, °C in primary display, °F in secondary.
– °C: Single display, in °C only.
– °F/°C: Dual display, °F in primary display, °C in secondary.
– °F: Single display, in °F only.
– Press
4 mA to 20 mA
Percentage scale for mA.
– Available options: 4 – 20 mA, 0 – 20 mA, or OFF.
– Select OFF to disable this function for normal operation.
SINGLE
Audible continuity.
– Available options: SINGLE, OFF, or TONE.
0.5 Hz
Minimum measurement frequency.
Available options: 0.5 Hz, 1 Hz, 2 Hz, or 5 Hz.
2400
Beep frequency.
– Available options: 4800 Hz, 2400 Hz, 1200 Hz, 600 Hz, or OFF.
– To disable this function, select OFF.
10 M
Automatic power off.
– To enable this function, select a value within the range of 1 minute to
99 minutes.
– To disable this function, set all digits to zero ("OFF" will be indicated).
HIGH
Default power-on backlight brightness level. Available options: HIGH, MEDIUM,
or LOW.
FACTORY
Power-on melody. Available options: FACTORY, USER, or OFF.
FACTORY
Power-on greeting. Available options: FACTORY, USER, or OFF.
to swap between °C and °F.
Keysight U1253B User's and Service Guide
Publicité
