Use Of Fan; How To Insert Batteries In The Infrared Remote Control - emmeti EGWW - 0712 Manuel D'installation Et D'utilisation

3. USE OF FAN

Symbols on the display






 Indicates the transmission of an infrared signal to the fan (the
transmission is automatic).
 Indicators of the operating mode of the fan.
Automatic
(Not available)
B A
Cooling
Deumidification
B A
Ventilation
B A
Heating
 Clock indicator.
 Indicates the preset time of the programmed shutdown OFF. O N O F F
 Indicates the preset time of the programmed startup ON.
O N OFF
6 Indicates the activation of the night-time shutdown program SLEEP.
O N O F F
 Temperature indicator (indicates the set temperature) - standard °C
Celsius or °F Fahrenheit.
 Pre-set fan speed indicator.
AUTO
Auto* Low
 Indicates the automatic movement of the horizontal deflector.
 Indicates the activation TURBO ventilation (Not available).
 Illumination of the display on the indoor unit
 Keypad lock activation indicator
Set temperature indicator, internal temp (external temp. not available).

 Anti-mould function indicator
 Heat function (Not available)
 AIR function (Not available)
 I FEEL function activation indicator (Not available)
 
AUTO



 

 
Medium High
(Not available)

3.2 How to insert batteries in the infrared remote control

The batteries have been designed and produced with
high quality materials and the components can be
recycled and/or re-used.
The symbol of the crossed-out rubbish bin indicates that
the product (batteries) at the end of its useful life must
be handled separately from domestic waste and must be
sent to a separate waste collection center, as provided by
the European Community 2006/66EC, art. 20 and annex II.
If under the bin there is a chemical symbol, this indicates that the batte-
ries have a certain concentration of heavy metal.and it will be indicated
as follows:
Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)
The infrared remote control is powered by two 1.5 Volt alkaline batteries
(type AAA).
 Remove the cover of the battery compartment.
 Insert the batteries observing the right polarities (+/-).
 Close the battery compartment.
 Set the clock following the instructions set out in paragraph 3.8.
Note
If display is illegible or trembling, replace batteries once again.
Attention!
• Never use previously used batteries.
• Remove batteries from remote control when the fan is not used for a long
period of time.
2
GB GB
1
3
43