emmeti EGWW - 0712 Manuel D'installation Et D'utilisation page 32

INTRODUCTION
INFORMATION NOTE WEEE DIRECTIVE APPLICATION
Directive 2012/19 / EU
The crossed-out wheeled bin symbol on the equipment indicates that, at the end
of their useful life, all electrical and electronic products within the European Union
must be collected separately from other waste.
Do not dispose of this equipment with mixed municipal waste.
Assign the equipment to appropriate separate collection centres of electrical and
electronic waste or return it to the dealer when purchasing new equipment of an
equivalent type. Appropriate separate collection of the equipment for subsequent
recycling, treatment and environmentally compatible disposal contributes to avoid
possible negative effects on the environment and health due to the presence of
dangerous substances in electrical and electronic equipment and resulting from an
incorrect disposal or misuse of the same or parts thereof. Separate collection also
favours recycling of the materials the equipment is made up of. Current legislation
provides for sanctions in case of illegal disposal of the product.
DECLARATION OF CONFORMITY
Fan Coil are conform to the European standard n° 2014/30/EC regarding
Electromagnetic Compatibility.
Relative to the 2014/35/EC standard on Low Voltage.
2012/19/CE WEEE
2011/65/CE RoHS
USEFULS INFORMATIONS
For information regarding service and spare parts, contact the supplier.
The following symbols are used in some parts of the booklet:
CAUTION
For actions that require particular caution and adequate preparation.
FORBIDDEN
For actions that MUST NOT be carried out..
32
Unit description
The fan coils are appliances intended for high quality civil use. The ele-
gant aesthetic design, the control electronics and the top class compo-
nents facilitate its location and guarantee optimum conditions of comfort.
INDOOR UNIT
• Housing: made of self-extinguishing plastic
• Electric fan unit: cross-flow fan with direct current motor 3 speeds and
auto function
• Exchange coil consisting of copper pipes with swirl design and alu-
minium fins
• Control card microprocessor
• Filtering systems activated charcoal filters
REMOTE CONTROL
The infrared remote control is used for control, adjustment and program-
ming; its functions and use are described in the user guide.
GB GB