Memory Scan; All -Channel Scan; Group Scan - Kenwood TM-281A Mode D'emploi

MEMORY SCAN

Memory Scan monitors Memory Channels in which you
have stored frequencies.
A -C S
LL HANNEL CAN
The transceiver scans all of the Memory Channels in
which you have stored frequencies.
1 Press [MR] (1s).
• Scan starts from the last Memory Channel number and
ascends up through the channel numbers (default).
• To jump to a desired channel while scanning, quickly turn
the Tuning control.
• To reverse the scan direction, turn the Tuning control or
press Mic [UP]/[DWN].
2 Press any key other than [F] or [
8
All-Channel Scan.
Note:
You must have 2 or more Memory Channels that contain data,
◆
excluding special function Memory Channels (L0/U0 ~ L3/U3, Pr,
and AL).
You can perform Memory Scan while in CH Display Mode. While
◆
Scan is paused, the Channel number blinks.
G S
ROUP CAN
The transceiver scans Memory Channels in groups of 20
channels. When Menu No. 15 (M.CH) is set to 100, the
transceiver uses 5 groups of 20 channels. When Menu
No. 15 (M.CH) is set to 200, the transceiver uses 10
groups of 20 channels.
42
1 Press [MR] and turn the Tuning control or press Mic
2 Press [MENU] (1s).
3 Press any key other than [F] or [
] (Power) to stop
[UP]/[DWN] to select a Memory Channel in the range
of the group you want to scan.
• Scan starts from the selected Memory Channel number
and ascends up through the channel numbers (default).
• To reverse the scan direction, turn the Tuning control or
press Mic [UP]/[DWN].

Group Scan.

Note: You must have 2 or more Memory Channels in the selected
group that contain data.
100 Channels
G o r u p : 1 0 ~ 1 9
G o r u p : 2 2 0 ~ 3 9
G o r u p : 3 4 0 ~ 5 9
G o r u p : 4 6 0 ~ 7 9
G o r u p : 5 8 0 ~ 9 9
] (Power) to stop
200 Channels
G o r u p : 1 0 ~ 1 9
G o r u p : 2 2 0 ~ 3 9
G o r u p : 3 4 0 ~ 5 9
G o r u p : 4 6 0 ~ 7 9
G o r u p : 5 8 0 ~ 9 9
G o r u p : 6 1 0 0 ~ 1 1 9
G o r u p : 7 1 2 0 ~ 1 3 9
G o r u p : 8 1 4 0 ~ 1 5 9
G o r u p : 9 1 6 0 ~ 1 7 9
G o r u p 1 : 0 1 8 0 ~ 1 9 9