Wilo Stratos Notice De Montage Et De Mise En Service page 87

LC display
Installation and operating instructions Wilo-Stratos/-D/-Z/-ZD
Setting
After another 5 seconds, the display switches to
menu level 3.
"HV" appears on the display (factory setting).
Turning the control button switches the
setting to cooling/air-conditioning (AC)
operating mode.
"AC" flashes.
The setting is applied.
The next menu is displayed.
Switching from SI to US units
"m ft" appears on the display and the currently set
unit flashes (factory setting [m]).
Turning the control button changes the
setting to [ft]. The new setting starts to
flash.
The setting is applied.
The display returns to the basic setting
English
.
81