Wilo Stratos Notice De Montage Et De Mise En Service page 84

English
Dual pump operation:
menu sequence during normal operation
When the module is switched on, all symbols
seconds. Then, the current setting
display, the same menu sequence
Then, the MA menu is displayed permanently.
LC display
78
is displayed. When you "scroll" on the MA
... is displayed as for the single pump.
Setting
on the MA indicates SL. If you
firm the SL, the other (right-hand) pump becomes
the master pump.
Master and slave have thus been swapped. Pro-
gramming is now only possible on the right-hand
(MA) pump.
Adjustments cannot be made at the SL. It is only
possible to swap master and slave pumps at the
master pump.
Setting
Peak load or main / standby mode
The current setting is displayed:
peak-load operation, or
main/standby operation
Turning the control button results in the
other setting lighting up.
The setting is applied
The display returns to the basic setting
appear on the display for 2
.
WILO SE 04/2016
to con-