Screen Saver; Infrared Night Vision - Angelcare AC1120 Manuel Du Propriétaire

5.5 - SCREEN SAVER

Allows you to set the screen saver starting point.
1
2
OFF/5/10/15/20 sec
MANUAL SETTING:
To manually trigger the screen saver mode quickly press the Parent Unit Power
button. Do not press the power button for more than 2 seconds since this will
shut down the Parent Unit.
TO REVERT BACK TO CAMERA CAPTION
Press the Power button
(but do not hold down for more than 2
seconds or unit will shut OFF)

5.6 - INFRARED NIGHT VISION

Allows you to capture image when lighting is unsufficient.
TO ACTIVATE NIGHT VISION:
Press the Night Vision icon to chose available modes:
The Moon icon will appear
when the infrared LEDS are ON.
OFF
3
ON
OK
Press the screen
OR
AUTO: The infrared LEDS will turn on automatically
when the lighting is not sufficient. The image
transition takes 20 seconds
ON: The infrared LEDS are ON at all times.
OFF: The infrared LEDS are OFF at all times.
1) Press the Menu icon to access
main menu.
2) Press Settings icon
to access sub-menu.
3) Press the (+ or -) to set the delay
before video mode will turn into screen
saver mode.
4) Press OK to confirm.
NOTE:
Screen Saver icon will appear
when video is in Screen Saver mode.
There are 4 built-in infrared LEDs
on the Nursery Unit to enable clear
black and white image. The image
transition takes 20 seconds.
OR
Press Talk button
E
N
17