Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Mounting
Be sure to comply with the mounting instructions below:
• Note the installation side (standard configuration is in return line)
• Note direction of flow (labelled with arrow)
• Ensure there is sufficient distance from sources of electromagnetic radiation
• Mounting position in piping which is permanently filled
• No air bubbles in the meter (a tipped installation position is recommended)
• Inlet and outlet sections for flow device improve accuracy
• Calculator must be removed when the material temperature is greater than 90 °C or if T
T: 5...90 °C
T
>T
Water
Ambient
12
Water
T: 5...130 °C / 150 °C
T
<T
Water
Ambient
<T
.
Ambient
Publicité
Table des Matières
