Keysight Technologies 3458A Guide D'utilisation page 50

2 Getting Started
Making a measurement
In the power-on state, DC voltage measurements are selected and the multimeter
automatically triggers and selects the range. In the power-on state, you can make
DC voltage measurements simply by connecting a DC voltage to the input
terminals as shown in
for AC voltage, 2-wire resistance, AC+DC voltage, digitizing, and frequency or
period measurements from a voltage input source. Refer to
CAUTlON concerning the multimeter's maximum input voltage and current.
Figure 2-2 Standard 2-wire (plus guard) measurements
50
Figure 2-2. The connections shown in Figure 2-2 also apply
Chapter 3 for a
Keysight 3458A User's Guide