Keysight Technologies 3458A Guide D'utilisation page 342

6 Command Reference
SLOPE
SLOPE is used in conjunction with the LEVEL command and specifies which slope
of the signal will be used by the level-detection circuitry.
Syntax
SLOPE [slope]
slope
Selects the positive-going or negative-going slope of the input signal for use by
the level detection circuitry. The choices are:
slope
Parameter
NEG
POS
Power-on slope = POS.
Default slope = POS.
Remarks
– Query command: The SLOPE? query command returns the present slope.
– Related commands: LEVEL, LFILTER, NRDGS, SSRC, TRlG
Example
OUTPUT 722;"SLOPE POS" !SELECTS THE POSITIVE GOING SLOPE FOR
!LEVEL DETECTION
342
Numeric
query equiv.
0
1
Refer to Query commands
Description
Selects negative-going slope
Selects positive-going slope
near the front of this chapter for more information.
Keysight 3458A User's Guide