Tylo Prime+ 1313/C Mode D'emploi page 6

Left bench valance (
• Insert the bench valance between the left and right wall panel sections.
• Connect the S-3 electrical supply to the S-3 junction box.
• Fix the cover of the S-3 junction box with 2 Phillips screws.
Slide the fan component (Box 1) into the retaining bracket on the bench valance.
Connect the white connection of the black
junction box to the white connection on the fan.
Right bench valance (
• Insert the bench valance between the left bench valance and the right side panel.
• Connect the S-4 electrical supply to the S-4 junction box.
• Fix the cover of the S4 junction box with two Phillips screws.
1):
Box
1):
Box
Page 6