Tylo Prime+ 1313/C Mode D'emploi page 3

How to construct the sauna:
Note – there are (14) power connections inside the sauna.
(10) are in the cabin: left and right rear panels, left and right front, panels, left and right
bench valance, fan, left and right bench and main power connection
There are additional power connections on the top outer face of the ceiling.
(1) Mains connection cable for the sauna. Do NOT insert the main electrical connection
cable for the sauna into the socket before all the assembly steps have been
completed correctly.
------------------------------------------------------------------------------------------------------------------------------------------------
There are (8) power connection/ junction boxes that are labelled accordingly and must be connected after
assembling each section.
Left back wall panel
B1 to B1
Right bench valance
S4 to S4
These (8) power plugs are connected easily by simply inserting the white plug of the white junction
box cover into the correct plug-in connection (3) in the junction box.
Example below: L1 to L1 (left wall panel power connection) (left wall panel junction box)
Fitting the junction box covers: After the junction box has been connected securely fix the junction
box cover with a Phillips screwdriver and 2 Phillips screws from Box 1.
Right back wall panel Left front Right front Left bench valance
B2 to B2 L1 to L1 R1 to R1
Left bench
S1 to S1
Page 3
S3 to S3
Right bench
S2 to S2