Installation; Inserting The Batteries; Storing The Outdoor Movement Detector In The Central Unit/Phone Dialler - SOMFY 1875128 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation

Inserting the batteries

Make sure the batteries are inserted the right way round (+/-).
Make sure that the ends of the batteries are touching the battery contacts.
Insert 3 LR03 batteries in the battery pack on the outdoor detector.
Storing the outdoor movement detector
in the central unit/phone dialler
Setting the central unit/phone dialler to storage mode:
If your system is already operational, and the central unit/phone dialler is already installed, and you want to
add a detector. You can enter storage mode in 3 ways:
By going to the "Device list" screen in the Installer menu and pressing
system installation manual.
Using the LCD keypad, and entering menu + installer code + 753 (open memory menu), see the alarm system
installation manual.
Using a previously stored remote control, and pressing "OFF" until the indicator goes out. You will hear a beep
on the central unit.
Storing the detector:
Reminder: maximum of 50 devices per central unit/phone dialler.
Press the button inside the outdoor movement detector:
You will hear a
BEEP
on the central unit/phone dialler.
The outdoor movement detector is stored in the central unit/
phone dialler.
For the outdoor detector to be able to control roller
shutter or light receivers, you must:
store the central unit/phone dialler on the roller shutter
receiver; see menu 7611,
store the central unit/phone dialler on the light receiver;
see menu 7612.
Copyright © 2022 Somfy Activités SA. All rights reserved.
Opening
, see the alarm
5

Publicité

Table des Matières
loading

Table des Matières