SOMFY 1875128 Mode D'emploi page 61

Outdoor
movement
detector
dual-technology
Thank you for purchasing a dual-technology outdoor movement detector for your Somfy alarm system.
If the screws and anchors provided are not suitable for the material of the wall, obtain the correct
type of screws and anchors. Failure to do this may result in the product falling off the wall.
Do not subject the product to impacts or drops, or expose it to flammable materials or a heat source,
or to moisture or splashing liquid, and do not immerse it in liquid.
Do not use abrasive products or solvents to clean it.
This dual technology outdoor movement detector is compatible with the following Somfy central
unit/phone dialer:
PROTEXIAL IO (2010 and subsequent versions)
Read this manual totally to install it.
HOME KEEPER
To install it :
− In connected mode, recommended by Somfy, that means with the central unit is linked to
internet, the installation of this detector must be done with a smartphone thanks to the free
Home Keeper PRO application. Let follow the step by step intuitive guide, which allows you to
install this detector quickly, to personnalise the settings and the life modes, and to test the
installation.
− In non connected mode, that means with the settings done thanks to the Home Keeper LCD
keypad, read this manual without taking into account the chapter "Affect a zone to the outdoor
movement detector" in pages 6 and 7.
The outdoor movement detector dual-technology will be active in Night mode (outdoor and
peripheral protection) and in ON total mode.
We recommend that you:
Read this manual carefully and make absolutely sure that you follow all the mounting and operating
instructions in order to get the best possible use from your Somfy alarm system.
Keep this manual in a safe place for the entire lifetime of the product.