Changing The Blower For Use As A Vacuum Shredder; After Finishing Work; Transporting - Stihl SHA 56 Notice D'emploi

English
12.3 Attaching and Removing the
Blower Tube
12.3.1 Mounting the Blower Tube
6
5
3
2
► Align the peg (3) with the slot (2).
► Push the nozzle (1) onto the blower tube (4)
up to the desired position.
► Turn the nozzle (1) until it engages
The nozzle (1) engages with an audible click.
► Align the retaining latch (5) with the slot (6).
► Push the blower tube (4) onto the blower.
The retaining latch (5) engages with an audi‐
ble click.
12.3.2 Removing the Blower Tube
► Depress the retaining latch and hold it
depressed.
► Remove the blower tube from the blower.
12.4 Holding and Guiding the
Blower
► Hold and guide the blower with one hand on
the control handle - wrap you thumb around
the control handle.
12.5 Blowing
► Insert the battery and switch the blower on.
► Point the nozzle at the ground.
► Move forward slowly in a controlled manner.
30
4
1

13 Changing the Blower for Use as a Vacuum Shredder

13 Changing the Blower for
Use as a Vacuum Shred‐
der
13.1 Changing the Blower for Use
as a Vacuum Shredder
► Switch off the blower and remove the battery.
► Remove the blower tube.
► Turn the control handle.
► Attach the suction tube.
► Attach the catcher bag.

14 After Finishing Work

14.1 After finishing work
► Switch off the vacuum shredder and remove
the battery.
► Empty the catcher bag.
► If the vacuum shredder is wet: Leave the vac‐
uum shredder to dry.
► If the catcher bag is wet: Allow the catcher bag
to dry.
► If the battery is moist or wet: Allow the battery
to dry, 20.4.
► Clean the vacuum shredder.
► Clean the catcher bag.
► Clean the battery.

15 Transporting

15.1 Transporting the Vacuum
Shredder
► Switch off the vacuum shredder and remove
the battery.
► If the suction tube is removed: Close the
shield.
Carrying the vacuum shredder
► Carry the vacuum shredder with one hand by
the loop handle with the suction tube behind
you.
► If the vacuum shredder is changed for use as
a blower: Carry the blower with one hand by
the control handle.
Transporting the vacuum shredder in the car
► Secure the vacuum shredder so that it cannot
turn over or move.
15.2 Transporting the battery
► Switch off the vacuum shredder and remove
the battery.
► Make sure that the battery is in a safe condi‐
tion.
► Pack the battery in packaging in such a way
that it cannot move inside the packaging.
0458-828-9621-C