Publicité
Les langues disponibles
Les langues disponibles
Reports
System Reports
System reports are accessed from the System Status (Home) Screen (see page 5) by touching one of the
four report buttons at the bottom of the screen. Table 4 describes the available System reports.
Report Button
Touch to display Inventory and Shift
Inventory Reports for each tank.
You can touch the Print button on
the display to print the report to a
connected printer.
Touch to display the Hourly Inven-
tory Report for a selected tank.
Touch the Print button to print the
report to a connected printer.
Touch to display Delivery Reports
for each tank. Includes last delivery
and up to previous 9 deliveries. You
can touch the Print button on the
display to print the report to a con-
nected printer.
Touch the Current Test Results but-
ton to display the results of the last
passed Annual, Periodic, and Gross
tests. You can touch the Print button
on the display to print the report to a
connected printer.
Touch to display
the Environmental
Reports Screen.
When this screen
displays you can
select one of two
test reports.
Touch the Fullest Last Pass button
to display the results of the last 12
Periodic (1 for each month) tests
and Last Annual test in which the
tank had the most volume.You can
touch the Print button on the display
to print the report to a connected
printer.
Table 4: System Reports
Report
CURRENT TEST
RESULTS
Report Parameters
INVENTORY REPORT
Fuel height, Fuel Volume, TC Fuel Volume,
Water Height, Ullage, and Fuel Temperature.
See example on page 50.
HOURLY INVENTORY REPORT
Date, Hour, Volume, Height, Water, Temp
See example on page 51.
DELIVERY
Start Date, Time, Volume, TC Volume,
End Date, Time, Volume, TC Volume,
Increase Volume Amount, TC Volume Amount
CURRENT TEST RESULTS
Test Type, Start Date/Time, Test Result, Hours
Run, %Volume in Tank at Time of Test
FULLEST LAST PASS REPORT
Test Type, Start Date/Time, Hours Run, %Vol-
ume in Tank at Time of Test
49
Publicité
