Veeder-Root TLS2 Mode D'emploi page 36

TLS2 Setup
[256] Alarm Relay Setup Screen
Legend for numbered boxes
This screen allows you to select the mode of activation
for the remote beeper relay.
1
Alarm Relay [256] - touch the Down Arrow button to
the right of the window and select: None (default),
Overfill, or All Alarms.
• If Overfill is selected, an overfill condition on any
tank will activate the Alarm Relay.
• If All Alarms is selected, any alarm going active
will activate the Alarm Relay.
• If None is selected, the relay will not be activated.
• Touching the Alarm Acknowledgement button will
deenergize the Alarm Relay.
01-01-2000 ALL FUNCTIONS NORMAL
12:00 AM
1
[256]
[256] Alarm Relay Setup Screen
31