Installation; Receiving The Product; Dimensions And Weight; Handling - Sime Brava One 40 BF Manuel D'installation Et D'emploi

EN
2

INSTALLATION

m
CAUTION
The appliance must only be installed by the Sime
Technical Service or by qualified professionals who
suitable protective safety equipment.
MUST wear
2.1

Receiving the product

appliances are delivered in a single unit protected
Brava One 40 BF
by cardboard packaging.
The plastic bag found inside the packaging contains the following:
– Installation, use and maintenance manual
– Paper template for boiler installation
– Certificate of warranty
– Hydrostatic test certificate
– System booklet
– Bag with expansion plugs
d
IT IS FORBIDDEN
To leave packaging material around or near children
since it could be dangerous. Dispose of it as prescribed
by legislation in force.
2.2

Dimensions and weight

H
W
Description
W (mm)
D (mm)
H (mm)
Weight (kg)
2.3
Once the packaging has been removed, the appliance is to be
handled manually, tilting it slightly, lifting it and applying pressure
in the points indicated in the figure.
Fig. 7
d
a
2.4
The room where the appliance is to be installed must comply
with the Technical Regulations and Legislation in force. It must
be equipped with suitably sized ventilation openings when the
installation is a "TYPE B" installation.
The minimum temperature of the installation room must NOT be
lower than -5 °C .
m
D
Fig. 8

Handling

IT IS FORBIDDEN
To grip the appliance casing. Hold the "solid" parts of
the appliance such as the base and structural frame.
WARNING
Use suitable tools and accident protection when
removing the packaging and when handling the
appliance. Observe the maximum weight that can be
lifted per person.

Installation room

CAUTION
– Before assembling the appliance, the installer MUST
make sure that the wall supports the weight.
– Remember to consider the space needed in order to
access the safety/adjustment devices and to carry
out maintenance interventions (see Fig. 10).
Brava One 40 BF
450
340
700
36
Fig. 9
11