Sime Brava One 40 BF Manuel D'installation Et D'emploi page 2

Masquer les pouces Voir aussi pour Brava One 40 BF:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

  • FRANÇAIS, page 34
SAFETY WARNINGS AND REGULATIONS
m
WARNINGS
– After having removed the packaging
make sure that the product supplied is
integral and complete in all its parts. If
this is not the case, please contact the
Dealer who sold the appliance.
– The appliance must be used as intended
by
who is not responsible for any
Sime
damage caused to persons, animals
or
things,
adjustment, maintenance and improper
use of the appliance.
– In the event of water leaks, disconnect
the appliance from the mains power
supply, close the water mains and
promptly inform professionally qualified
personnel.
– Periodically check that the operating
pressure of the water heating system
when cold is
case, increase the pressure or contact
professionally qualified personnel.
– If the appliance is not used for a long
period of time, at least one of the
following operations must be carried
out:
- set the main system switch to "OFF";
- close the gas and water valves for the
water heating system.
– In order to ensure optimal appliance
operations
maintenance and checks are carried
out
ONCE A YEAR
– If the power cable is damaged, replace
it with a cable ordered as a spare part
with the same characteristics (type X).
Assembly must be by carried out by a
qualified professional.
2
improper
installation,
. If this is not the
1-1.2 bar
recommends that
Sime
.
m
WARNINGS
It is recommended that all operators
read this manual carefully in order to
use the appliance in a safe and rational
manner.
is an integral part of the
This manual
appliance. It must therefore be kept
for future reference and must always
accompany the appliance in the event
the appliance is transferred or sold to
another Owner or User or is installed
on another system.
Installation and maintenance
appliance must be carried out by a
qualified company or by a professionally
qualified technician in accordance
with the instructions contained in the
manual. Once the work is complete,
the company or technician will issue a
declaration of conformity with national
and local technical standards and
legislation in force in the country where
the appliance will be used.
Any repairs on the appliance
carried out solely by professionally
qualified personnel, using original
spare parts only. Failure to comply with
these instructions can jeopardise the
appliance's safety and void the warranty
with immediate effect.
Fonderie SIME S.p.A.
to make improvements to its products
at any time without prior notice,
without compromising their essential
characteristics. The graphic illustrations
and/or images in this document may
show optional accessories that vary
according to the country in which the
appliance is used.
EN
of this
must be
reserves the right

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

8112106

Table des Matières