Tools Required - R&G LP0111BK Instructions De Montage

LEGEND
ITEM 1 = LICENCE PLATE BRACKET (TB0111BK) (x1).
ITEM 2 = 150mm LENGTH OF HEAT SHRINK (x3).
ITEM 3 = M6x16mm LONG BUTTON HEAD BOLTS (x2).
ITEM 4 = M8 PENNY WASHERS (x5).
ITEM 5 = M6x20mm LONG BUTTON HEAD BOLT (x1).
Page | 2
ITEM 6 =2.5mm x 60mm LONG CABLE TIES (CT060BK) (x3).
ITEM 7 = LICENCE PLATE ILLUMINATOR (LA0002) (x1).
LICENCE PLATE ILLUMINATOR CONNECTION (CON006) (x1).
ITEM 8 = CABLE CLIPS (x2).
ITEM 9 = REFLECTOR (x1).
Please note that in cases where kits are packed with rubber washers holding the components onto
FITTING INSTRUCTIONS

REMOVE SEAT.

UNCLIP CABLE TIDY/COVER FOR REAR LIGHT AND INDICATOR WIRING
SHOWN IN PICTURE 1.

DISCONNECT INDICATORS AND LICENCE PLATE ILLUMINATOR WIRING
SOCKETS (THESE ARE MARKED PLEASE ENSURE TO NOTE POSITION AND
ROUTING).

REMOVE THE THREE BOLTS SECURING THE ORIGINAL LICENCE PLATE
BRACKET AS ARROWED IN PICTURE 2 AND GENTLY LOWER WHILE ENSURING
THE WIRING PLUGS DO NOT SNAG ON ITS WAY THROUGH THE ORIGINAL
ROUTING.
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
the bolt – the rubber washers should be thrown away!

TOOLS REQUIRED


Set of metric Allen keys to include 4 and 5mm A/F size.

Electrical pliers/crimps.

Small amount of superglue.
1
PICTURE
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ

8mm spanner.
R&G Racing
www.rg-racing.com Email:
2
2
PICTURE
info@rg-racing.com