Krups JC100810 Mode D'emploi page 18

PROBLEM
Vibrations
The door will not close correctly
The fan operates continuously
The appliance cannot be switched on
The temperature inside does not seem correct
19
POSSIBLE CAUSES
* Check that your wine cabinet is stood on a flat,
stable, heat-resistant and level surface.
* The surface on which the wine cabinet is standing
is not flat or level.
* The shelves are not positioned correctly.
* This is the normal operation of the temperature
regulation system. If you have set your wine cabinet
to a low temperature or if the room is at more than
25 °C, the fan will operate more.
* The appliance has been designed to operate
continuously when the conservation temperature is
low.
* Check the mains socket and if it is controlled by a
switch.
* Check that it is plugged in correctly to the socket.
* Check that the mains socket is powered.
* Check that the ventilation grids on each side of the
appliance are not obstructed. Leave at least 15 cm
of space free on all sides of the appliance.
* The cooling system is designed to operate optimally
at an ambient temperature of between 18 °C and
26 °C.
* When you switch on the appliance for the first time,
it can take up to 24 hours to reach the programmed
temperature.
English