Krups JC100810 Mode D'emploi page 13

2 - DESCRIPTION
Components of the appliance
Wine service cabinet appliance
1. Storage compartment
2. Shelves for bottles
3. Glass door
Control panel
4. Door handle
5. Temperature setting display
6. Temperature selection buttons
7. Button for light
8. Ventilation grid
3 - INSTALLATION
9. Adjustable feet
Positioning the appliance:
Your service cabinet may be placed on a work top or on the floor.
Before you install your appliance, ensure that the position chosen meets the following requirements:
* Choose a position that is flat, stable, heat-resistant and level.
* Choose a position with a mains socket nearby.
* Ensure that there is a minimum distance of 10 to 15 cm around all sides of the appliance.
* Protect it from direct exposure to sunlight.
* Do not use the wine cabinet outdoors.
* Do not install the wine cabinet on very hot surfaces or close to naked flames.
Your appliance should be unplugged.
Adjusting the feet:
For best installation results, your cabinet has adjustable feet.
You can turn them to adjust their height to ensure that the appliance is stable.
Once your wine cabinet has been installed, you may plug it in.
When first switching on your appliance or after prolonged stoppage, your cabinet requires one day to
reach the storage temperature.
4 - USE
Your cabinet can display the temperature in Fahrenheit or Celsius (°F / °C). To switch from one mode to the
other, press the light button for 10 seconds.
a) Selecting the temperature
Your wine service cabinet lets you choose the most suitable storage temperature for your wine.
In the section "Choosing the correct temperature" you will find a guide to help you adapt the temperature to
suit the wine you have.
To adjust the temperature, press one of the "6" buttons.
14
and
and selecting Celsius or Fahrenheit
English