Equipment Maintenance - Motorola Solutions MTP8 Serie Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 117

Equipment Maintenance

As part of the regular maintenance inspections, the equipment should be inspected for the following items which may impact the safe use of the equipment
in the hazardous locations. DO NOT use the radio in hazardous areas, if any of the following conditions is observed.
Send these radios to Motorola Solutions authorized repair centers for inspection/repair, if any of the following conditions is
observed:
Modifications of the enclosure, antennas, or battery.
The bottom label or the battery INMETRO label is damaged and the content is partly or completely unreadable.
Stickers or additional labels on the external enclosure of the radio and the battery.
Additional labels on the chassis and the battery cover that cover the original Motorola Solutions labels.
The antenna isolation is damaged broken or partly missing.
The dust cover is damaged or broken.
The battery contact seal is damaged.
Engraving on the radio housing, chassis, or the battery enclosure.
Cracks or deep scratches in the lens or the radio and battery enclosure.
Missing screws or damaged tamper labels (indicate the radios have been opened by unauthorized persons).
Signs that the equipment had been exposed to temperatures, chemical substances, or mechanical stress exceeding the limits and specification of
Motorola Solutions:
• Discoloration of the plastic parts.
• Signs of heavy corrosion on the chassis of the radios.
• Signs of deformation of the radios or battery enclosure (bent antennas are permissible as long as the plastic is still intact).
• Difficulty in screwing/unscrewing the antenna (damaged thread).
• Difficulty to latch and unlatch the battery (battery interface or latch may be damaged).
• If the radio had been exposed to oil-based liquids, inspect that no oily substances come into contact with the vent.
For chemicals that have come into contact with the radio/battery/accessory:
• Some chemical might have a corrosive or softening effect on plastics.
English
• DO NOT expose any part of the radio/battery/accessory enclosure and display lens to such chemicals.
• If radio/battery/accessory has been exposed to such chemicals, they should be cleaned outside the hazardous location.
• If radio/battery/accessory has been exposed to such chemicals and show any crack/damage, then the equipment should be sent back to
Motorola Solutions authorized repair centers.
• DO NOT use any non-approved casings/covers/protection bags with the radio/battery/accessory for protection against chemicals.
4
English

Publicité

Table des Matières
loading

Table des Matières