Festo DSMI-25 Notice D'utilisation page 29

DSMI-...
3. Loosen the locking screws for the stops.
The stops can then be shifted easily.
4. Shift the nearest stop up to the stop lever.
5. Tighten the locking screws of the stops
again with the specified torque.
Nominal size
Tightening torque
After completion of static pre-adjustment of
all the stops without a shock absorber:
6. press the protective cap of the DSMI-...
back onto the snap ring of the housing.
Festo DSMI-... 0102NH English
Fig. 16
Fig. 17
DSMI-25 DSMI-40
5.9 Nm 25 Nm
Fig. 18
29