Maintenance, Troubleshooting - Burkert 6240 Manuel D'utilisation

Approved cable plug,
e.g. Type 2518 or other suitable
cable plug in accordance with
DIN EN 175301-803 Form A
Seal
6

MainTenance, TrOuBleshOOTing

Warning!
Risk of injury from improper maintenance.
▶ Maintenance may be carried out by authorized technicians only
and with the appropriate tools.
Risk of injury from unintentional activation of the system and an
uncontrolled restart.
▶ Secure system from unintentional activation.
▶ Following maintenance, ensure a controlled restart.
50 – 60 Ncm
6.1 Malfunctions
If malfunctions occur, check
whether
• the device has been installed
according to the instructions,
• the electrical and fluid con-
nections are correct,
• the device is not damaged,
• all screws have been
tightened,
• the voltage and pressure have
been switched on,
• the pipelines are clean.
english
If the magnet is not attracting
Possible causes:
• Short circuit or coil
interrupted,
• core or core area dirty.
9