Original Accessories/Auxiliary Equipment; Safety Guidelines For Battery Chargers; Before Use; Charging The Battery Pack (See Fig . A) - Parkside PABS 20-Li D5 Traduction Des Instructions D'origine

Original accessories/auxiliary
equipment
■ Use only the accessories and additional
equipment which are specified in the operating
instructions and are compatible with the
appliance .
WARNING!
■ Do not use any accessories which are not
recommended by PARKSIDE . This can lead to
an electric shock and fire .
Safety guidelines for battery
chargers
This appliance may be used by chil-
■
dren aged 8 years and above and
by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks . Children must
not play with the appliance . Clean-
ing and user maintenance tasks
may not be carried out by children
unless they are supervised .
The charger is suitable for
indoor use only .
WARNING!
■ To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer or the manufacturer's customer service
department or a similarly qualified person .
ATTENTION!
♦ This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/PAP 20 A3 .
♦ A current list of battery compatibility can be
found at www .lidl .de/Akku .
■ 20 │ GB │ IE

Before use

Charging the battery pack (see fig . A)

CAUTION!
► Always pull out the plug before you remove
the battery pack
battery pack to the charger .
NOTE
► Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C .
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level is
between 50% and 80% . The storage climate
should be cool and dry and the ambient tem-
perature should be between 0°C and 50°C .
♦ Connect the battery pack
battery charger
♦ Insert the power plug into the socket . The
control LED lights up red to indicate that the
appliance is charging .
♦ The green control LED
charging process is complete and the battery
pack is ready .
♦ Insert the battery pack
appliance (see Fig . B) .
Attaching/disconnecting the battery
pack to/from the appliance
Inserting the battery pack
♦ Push the rotation direction switch
middle position (lock) (see Fig . C) . Allow
the battery pack
(see Fig . B) .
Removing the battery pack
♦ Press the release button
battery pack (see Fig . D) .
from or connect the
to the rapid
(see Fig . A) .
indicates that the
back into the
into the
to click into the handle
and remove the
PABS 20-Li D5