Tools Required - R&G LP0222BK Mode D'emploi

Page | 2
LEGEND
ITEM 1 = LICENCE PLATE ILLUMINATOR & SHROUD (LA0002) (x1).
ITEM 2 = M5 x 12mm LONG COUNTERSUNK BOLTS (x2).
ITEM 3 = LICENCE PLATE BRACKET (TB0222 Part 1) (x1).
ITEM 4 = M6 x 16mm LONG BUTTON HEAD BOLTS (x4).
ITEM 5 = M6 WASHERS (x3).
ITEM 6 = LARGE RUBBER BUNG (RB0007) (x1).
ITEM 7 = SMALL RUBBER BUNG (RB-80-30-00) (x1).
ITEM 8 = M5 NYLOC NUTS (x2).
ITEM 9 = MINI INDICATOR ADAPTORS (I0051) (x4).
ITEM 10 = M5 WASHERS (x2).
ITEM 11 = INDICATOR BRACKET (TB0222 Part 2) (x1)
ITEM 12 = SELF-ADHESIVE CABLE CLIPS (x2).
ITEM 13 = REFLECTOR (x1).
ITEM 14 = 150mm LENGTH OF HEATSHRINK (x3).
ITEM 15 = WIRING CONNECTORS (CON0014) (x3).
ITEM 16 = 50mm LENGTH OF SELF-ADHESIVE FOAM (x2).
ITEM 17 = 2.5mm CABLE TIES (x3).
Please note that in cases where kits are packed with
rubber washers holding the components onto the bolt – the
rubber washers should be thrown away!
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301

TOOLS REQUIRED


Set of metric Allen keys.

Set of metric sockets and wrench.

Long Phillips screwdriver.

MAXIMUM TORQUE SETTINGS




Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Cable cutters.
M4 Bolt = 8 Nm
M5 Bolt = 12 Nm
M6 Bolt = 15 Nm
M8 Bolt = 20 Nm
R&G Racing
www.rg-racing.com Email: info@rg-racing.com