R&G LP0266BK Notice De Montage

Page 1 of 24
FITTING INSTRUCTIONS FOR LP0266BK LICENCE PLATE BRACKET
(FOR USE WITH STANDARD AND R&G MINI INDICATORS (8mm))
THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW.
DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT.
Please note that the way the kit is packed does not necessarily represent the way of mounting to the
T
HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY
Digital copies of these instructions are available to download from
Please note that in cases where kits are packed with rubber washers holding the components onto the bolt
•
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
KTM 690 SMC-R 2019-
bike
GENERAL TORQUE SETTINGS
M4 BOLT = 8Nm
M5 BOLT = 12Nm
M6 BOLT = 15Nm
M8 BOLT = 20Nm
M10 BOLT = 40Nm
– the rubber washers should be thrown away!
TOOLS REQUIRED
•
Set of metric Allen keys to include 3 and 4mm A/F .
Socket set to include 8, 12 and 13mm A/F sockets and wrench.
•
T25 andT30 Torx bit or key.
•
6 and 13mm Spanners.
•
Small amount of super glue.
•
Phillips driver.
•
Heat gun or hair dryer.
R&G Racing
Email: info@rg-racing.com
(
FOR CLARITY OF INSTRUCTIONS ONLY
www.rg-racing.com
www.rg-racing.com
LP0266
)