Black 1-1/8" Pan Head Screw - Sauder Palladia Serie Mode D'emploi

Step 8
Pull the DRAWER FRONT BRACKETS (9G and 10G) apart and slide them
å
into the grooves in the DRAWER SIDES (D211, D32, D36, and D37) as
shown in the large diagrams.
NOTE: The DRAWER FRONT BRACKETS are marked "RH" and "LH" for
å
easy identifi cation.
Fasten the DRAWER BOX FRONTS (S and Z) to the DRAWER FRONT
å
BRACKETS (9G and 10G). Use eight BLACK 9/16" LARGE
HEAD SCREWS (1S).
Fasten the DRAWER FRONTS (U and BB) to the DRAWER BOX
å
FRONTS (S and Z). Use eight BLACK 1-1/8" PAN HEAD SCREWS (9S).
Push down
9G
D36
BB
9S

BLACK 1-1/8" PAN HEAD SCREW

(8 used for the DRAWER FRONTS)
Page 14
D37
Z
These edges
should be even.
U
D36
S
These edges
should be even.
417714
BLACK 9/16" LARGE HEAD SCREW
(8 used for the BRACKETS)
Tap down with
your screwdriver
and hammer.
10G
D32
D211
www.sauder.com/services
1S