Table des Matières
Publicité
Step 10
Separate the WIDE EXTENSION SLIDES (40MC) from the WIDE EXTENSION RAILS (40MA) as shown in the upper
å
diagram below. Be prepared, the parts are greasy.
Fasten the WIDE EXTENSION SLIDES (40MC) to the FILE DRAWER SIDES (D211 and D32). Use four GOLD 5/16" FLAT
å
HEAD SCREWS (3S) through holes #1 and #4.
NOTE: The EXTENSION RAILS will be used later.
å
Fasten the KNOB (42K) to the FILE DRAWER FRONT (U). Use a SILVER 1-1/4" MACHINE SCREW (35S) through the
å
DRAWER BOX FRONT, through the DRAWER FRONT, and into the KNOB.
Push the black lever in and pull the SLIDE from the RAIL.
2
3
4
42K
Page 16
40MC
Open end
1
D32
U
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
D211
3
4
3S
417714
40MA
35S
SILVER 1-1/4" MACHINE SCREW
(1 used for the KNOB)
Open end
1
2
www.sauder.com/services
Publicité
Table des Matières
