Sauder Palladia Serie Mode D'emploi page 50

Step 44 Step
Fasten the LEFT MODESTY PANEL (L2) to the LEFT UPRIGHT (F2). Use
å
two BLACK 1-15/16" FLAT HEAD SCREWS (113S).
Insert the dowel end of four TWIST-LOCK® FASTENERS (7F) into the
å
large holes in the LEFT TOP (H2) and LEFT BACK (O).
NOTE: If you already pushed TWIST-LOCK® FASTENERS into the large
å
holes in the LEFT UPRIGHT (F2), pull the FASTENERS back out of the
holes. Pull at the front and back edges, slowly working the FASTENERS
out of the holes.
Push the LEFT UPRIGHT (F2) onto the TWIST-LOCK® FASTENERS (7F)
å
in the LEFT TOP (H2) and LEFT BACK (O). Tighten four
TWIST-LOCK® FASTENERS.
st
1
L2
These edges
should be even.
Page 50
F2
L2
417714
KEYBOARD KEYBOARD
DRAWER ON LEFT DRAWER ON LEFT
Don't worry. It isn't
Rome. This can be built
in a day.
113S
BLACK 1-15/16" FLAT HEAD SCREW
(2 used in this step)
7F
nd
2
F2
H2
O
www.sauder.com/services