Sauder Palladia Serie Mode D'emploi page 36

Step 30 Step
Fasten the CORNER BRACKETS (31G) to the SIDE
å
SKIRTS (RR and SS). Use eight BLACK 9/16" LARGE
HEAD SCREWS (1S).
Fasten an ANGLE BRACKET (5G) to the LEFT SIDE
å
SKIRT (SS). Use a BLACK 9/16" LARGE
HEAD SCREW (1S).
NOTE: Be sure the edge of the ANGLE BRACKET is
å
even with the edge of the LEFT SIDE SKIRT.
Fasten the LEFT SIDE SKIRT (SS) to the LEFT
å
BOTTOM (J2). Use fi ve BLACK 9/16" LARGE
HEAD SCREWS (1S) through the holes in the
BRACKETS and into the holes in the LEFT BOTTOM.
Page 36
RR
31G
These edges
should be even.
SS
J2
417714
KEYBOARD DRAWER
ON RIGHT
SS
BLACK 9/16" LARGE HEAD SCREW
(14 used in this step)
www.sauder.com/services
5G
1S