Sauder Palladia Serie Mode D'emploi page 53

Step Step 47
Fasten the CORNER BRACKETS (31G) to the SIDE
å
SKIRTS (RR and SS). Use eight BLACK 9/16" LARGE
HEAD SCREWS (1S).
Fasten an ANGLE BRACKET (5G) to the
å
LEFT SIDE SKIRT (SS). Use a BLACK 9/16"
LARGE HEAD SCREW (1S).
NOTE: Be sure the edge of the ANGLE BRACKET is
å
even with the edge of the LEFT SIDE SKIRT.
Fasten the LEFT SIDE SKIRT (SS) to the LEFT
å
BOTTOM (J2). Use fi ve BLACK 9/16" LARGE
HEAD SCREWS (1S) through the holes in the
BRACKETS and into the holes in the
LEFT BOTTOM.
www.sauder.com/services
RR
31G
These edges
should be even.
SS
J2
417714
KEYBOARD
DRAWER ON LEFT
SS
BLACK 9/16" LARGE HEAD SCREW
(14 used in this step)
5G
1S
Page 53