Sauder Palladia Serie Mode D'emploi page 7

Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, fasten the KEYBOARD SIDES (YY and ZZ)
å
to the KEYBOARD SHELF (AAA). Use four BROWN 1-1/2" FLAT
HEAD SCREWS (14S).
Short fi nished edge
These holes must be facing up.
www.sauder.com/services
ZZ
AAA
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
KEYBOARD DRAWER ON RIGHT VIDEO
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1967
to watch a video on how to assemble your unit.
KEYBOARD DRAWER ON LEFT VIDEO
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1993
to watch a video on how to assemble your unit.
BROWN 1-1/2" FLAT HEAD SCREW
417714
14S
(4 used in this step)
YY
Short fi nished edge
Page 7