Table des Matières
Publicité
Step 40
Step
Refer to the enlarged diagram to identify the parts on the HINGES.
å
The DOOR may need some adjustments. Follow the text below to make
å
needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOOR from side to side (horizontal), turn the adjusting screw
in or out.
To adjust the DOOR up and down (vertical), loosen
å
both vertical adjustment screws. Move the
DOOR up or down to the desired location.
Tighten the screws after making adjustments.
To adjust the DOOR in or out (depth), loosen
å
the mounting screw one turn and move the
DOOR in or out, as needed. Tighten the
mounting screw after making adjustments.
Page 46
Mounting screw (depth)
(vertical adjustment)
417714
KEYBOARD DRAWER
ON RIGHT
Adjusting screw (horizontal)
www.sauder.com/services
Publicité
Table des Matières
