Black 1-15/16" Flat Head Screw - Sauder Palladia Serie Mode D'emploi

Step 28 Step
Fasten the LEFT BOTTOM (J2) to the INNER LEFT END (D3).
å
Tighten two TWIST-LOCK® FASTENERS.
Fasten the LEFT BOTTOM (J2) to the LEFT UPRIGHT (F2). Use two
å
BLACK 1-15/16" FLAT HEAD SCREWS (113S).
Fasten the CONNECTOR PLATE (14G) to the LEFT TOP (H2). Use
å
four BLACK 9/16" LARGE HEAD SCREWS (1S).
Push two CORD CLIPS (9P) into the holes in the LEFT TOP (H2).
å
NOTE: The CORD CLIPS are used to manage your cords.
å

BLACK 1-15/16" FLAT HEAD SCREW

(2 used in this step)
9P
Page 34
113S
H2
J2
F2
14G
417714
KEYBOARD DRAWER
ON RIGHT
D3
BLACK 9/16" LARGE HEAD SCREW
(4 used for the CONNECTOR PLATE)
www.sauder.com/services
1S