Translation of the original installation instructions
TRANSLATION OF THE ORIGINAL INSTALLATION INSTRUCTIONS
Contents
1
About these assembly instructions .......... 13
1.1
Symbols on the title page................... 13
1.2
Legends and signal words ................. 13
2
Unpacking ride-on mower (01, 02) .......... 13
3
4
5
Assembly ................................................. 14
5.1
5.2
5.3
5.4
5.5
6
Start-up .................................................... 16
6.1
6.2
6.3
1 ABOUT THESE ASSEMBLY
INSTRUCTIONS
■
The German version is the original version of
the assembly instructions. All additional lan-
guage versions are translations of the original
assembly instructions.
■
Observe the operating instructions during op-
eration of the ride-on mower.
■
Keep the assembly instructions to refer to
during use of the product, and pass them on
to subsequent users.
■
Comply with the safety and warning informa-
tion in these assembly instructions.
■
The ride-on mowers are supplied with differ-
ent levels of equipment. Please note that the
illustrations may differ somewhat from the
original. Please contact a specialist workshop
or the manufacturer if you encounter difficul-
ties in following the descriptions.
493357_c
1.1
Symbols on the title page
Symbol
Meaning
Before assembling the ride-on
mower, read these assembly in-
structions carefully and perform all
assembly work conscientiously.
Please ask a dealer or the manu-
facturer if you have any questions
or doubts about assembly.
Assembly instructions
Never operate the petrol powered
device in the vicinity of open flames
or heat sources.
1.2
Legends and signal words
DANGER! Denotes an imminently danger-
ous situation which will result in fatal or serious
injury if not avoided.
WARNING! Denotes a potentially danger-
ous situation which can result in fatal or serious
injury if not avoided.
CAUTION! Denotes a potentially dangerous
situation which can result in minor or moderate
injury if not avoided.
IMPORTANT! Denotes a situation which can
result in material damage if not avoided.
NOTE Special instructions for ease of under-
standing and handling.
2 UNPACKING RIDE-ON MOWER (01, 02)
The ride-on mower is delivered partly disassem-
bled on a metal pallet (01).
1. Place the pallet on level ground during un-
packing.
2. Remove all accessory kits (01/1) and the
packaging materials.
3. Remove the 6 bolts and nuts (01/2) and lift
the upper part (01/3) off the pallet (01/a).
4. Remove the locking wires (02/1) from the
wheels (02/2) using pliers.
13