Black Diamond HELIO 350 Manuel D'installation page 3

2| GENERAL WARNINGS AND RECOMMENDATIONS
Before proceeding with any use, please make sure that you have fully understood what is written and
explained in this "INSTALLATION, USE and MAINTENANCE GUIDEBOOK ".
In case of any doubts and/or uncertainties, please contact the manufacturer for additions or
DOES NOT COMPLY WITH ANY DIN/ISO SAFETY STANDARD NOR ANY SAFETY CERTIFICATION.
In particular, this binding does not comply with DIN/ISO 11088 and/or DIN/ISO 13992 safety standards.
Therefore, the release systems offered by the binding could fail in releasing the boot when necessary
• This binding is conceived, developed and produced for FreeTouring activities. The high performances
and the extreme lightness required to this product can influence and/or reduce the safety features of
the product itself, including the quality or repeatability of the boot release in the event of a fall.
• This binding can only be used in combination with Alpine Touring boots, provided with standard "tech"
inserts and general geometries that comply with market standards.
• This binding heel part offers adjustable release systems with values in between 5 to 12. Calibrating the
most suitable release value for the User's characteristics may reduce the risk of injuries to the inferior
limbs under the femur.
• The user, by removing the "SEAL OF LIABILITY" from the binding, consciously assumes all the
responsibility raising from the use of this product, and therefore releases Black Diamond from any
damage caused to himself and/or third parties during the use of the product.
• Please, be aware that ski-mountaineering, like many other high mountain activities, is a DANGEROUS
SPORT, that may cause injuries to the ski mountaineer itself and/or third-party.
WARNING! DANGER!
clarifications regarding any content of the manual.
WARNING! DANGER!
and/or expected with a consequent danger for the User's safety.
WARNING! DANGER!
This binding model
3