Black Diamond HELIO 350 Manuel D'installation page 10

3.3.1.2| LATERAL RELEASE SYSTEM CALIBRATION (Mz)
The lateral release system
adjustment can be performed
through the back screw shown by the
PICTURE ON THE SIDE (use a good
quality PH2 or PZ3 insert). The set
release value is shown through the
upper window (PICTURE ON THE
SIDE, e.g. value "5").
Turn clock-wise the adjustment
screw to increase the release
value.
Turn counter clock-wise the
adjustment screw to decrease the
release value.
4| PRACTICAL USE INSTRUCTIONS
• It is highly recommended to strictly follow the operations described and illustrated in this chapter: a
wrong comprehension or execution of these procedures may create a greater risk for the user and/or
third parties, such as damages to the gear itself.
• Before proceeding with any operation or use, verify that the boots and the bindings are
COMPLETELY FREE from ice, dirt, debris or any other foreign body that may lead to a failure in the
regular functions of the bindings.
• Before proceeding with any operation, check the functional state and the wear condition of the
binding and its components: in case of doubts regarding the perfect functionality of one or more of
the binding's components, immediately stop using the product and reach a dealer for a deeper check
on the product and/or to start up a factory service process.
• Some functions of the binding can be handled with a ski pole. The use of a ski pole may create
scratches and/or an early wear of the product surfaces.
• The binding includes some powerful elastic systems. An involuntary, wrong or uncareful activation of
these system is dangerous for the User's or third party's safety. Always handle these bindings with
the proper care.
• Keep these bindings out of reach of children.
WARNING! DANGER!
10