Care, Maintenance And Storage - Black Diamond HELIO 350 Manuel D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5| CARE, MAINTENANCE AND STORAGE

WARNING! Remember to periodically lubricate the rear brake recall sledges with grease. This
In order to maintain a perfect functionality of the product, including the efficiency of the release
systems, Black Diamond recommends that you periodically lubricate all the joints and rotating contact
parts of the binding with grease.
After a medium to long period of inactivity, it is necessary to have the binding checked by an
"SPECIALIZED TECHNICIAN", in particular the general wear and tear of the binding, the proper
functionality of the systems and the lubrication state of the product.
After each use, carefully clean the binding from dirt, salt, sand or debris, using distilled water; do not use
spears or harsh chemical solvents.
When not used, set the binding as per the downhill mode in order to preserve the elasticity of the
springs. Store it in a dry and protective place; avoid excessive heat.
Do not make any modifications or tampering to the bindings: any of these actions will lead to the
cancellation of the product warranty; these actions could also compromise the functionality of the
bindings and increase the possibility of structural damages and therefore create a greater risk for the
user's and third party's safety.
6| WARRANTY
For one year following purchase unless otherwise indicated by law, we will warrant to the original retail buyer
only that our products are free from defects in material and workmanship as originally sold. If you receive a
defective product, return it to us and we will replace it subject to the following conditions: We do not warrant
products which show normal wear and tear or that have been used or maintained improperly, modified or
altered, or damaged in any manner.
11| LIMITATION OF LIABILITY ON THE PRODUCT
DO NOT COMPLY WITH ANY DIN/ISO SAFETY STANDARD.
In particular, these do not comply with DIN/ISO 11088 and DIN/ISO 13992 safety
By purchasing such products in a conscious and informed way as provided by this
"INSTALLATION, USE and MAINTENANCE GUIDEBOOK", the USER expressively accepts
without any reserve all the risks arising from the characteristics of the products, relieving
BLACK DIAMOND by any liability regarding eventual damages caused to the user or third
maintenance prevents malfunctions and damages to the brake.
WARNING! DANGER!
The USER is fully aware that the HELIO bindings
parties during the use of the product itself.
standards.
21

Publicité

Table des Matières
loading

Table des Matières